SUS630 Stainless Steel Cold Rolled Coil UNS S17400 ASTM A693 17-4PH
Strip
Grade 17Cr-4Ni-4Cu-0.2Nb, 17-4 PH (1.4542) is the most common example of the precipitation
hardening stainless grades.
Type 630 stainless alloy combines good corrosion resistance with
high strength and good impact toughness.
| C | Si | Mn | P | S | Cr | Ni | Cu | Nb |
| 0.07 max | 1.00 max | 1.00 max | 0.040 max | 0.030 max | 15.00~17.50 | 3.00~5.00 | 3.00~5.00 | 0.15~0.45 |
The 17-4PH grade combines the following characteristics:
- Good corrosion resistance (just below that of 304)
- High hardness and strength
- Controlled balance of mechanical properties by ageing
(precipitation hardening)
- Improved toughness compared to 431 including use at sub-zero
temperatures for the softer conditions
- Magnetic
- Thermal expansion comparable to carbon steel
- Easier to weld than martensitic grades like 420 and 431
17-4PH develops its high strength from the precipitation of copper
particles in its martensitic matrix.
It comes in various conditions denoted by H plus ageing temperature
in °F, for example H900, H1025 etc.
The higher the ageing temperature, the lower is the strength and
the higher are the ductility and toughness.
The minimum 0.2% PS varies from 520 MPa to 1170 MPa depending on
the condition.
The combination of high strength and good corrosion resistance
finds uses in:
Drive shafts, bearings, gears, hydraulic rams, valve stems, load
cells, bridge bearings, tensioning systems,
golf clubs, quick release pins, fasteners, aerospace, medical
devices, food processing, conveying equipment,
fall arrest systems
17-4PH is the natural choice of high strength, corrosion resistant
steel particularly where standard
martensitic grades like 431 aren’t quite good enough.
For Details, please Contact
WUXI GUANGLU Special Steel Co., Ltd.
Stainless martensitic • precipitation hardening steel • stainless
ferritic — Our answer to your needs
Tel: +86 510 81812873
Email: export@guanglusteel.com
