SUS630 Stainless Steel Flat Bars, 17-4PH Stainless Sheets, Plates

Grade 17-4 PH (1.4542) is the most common example of the precipitation hardening stainless grades.

It combines good corrosion resistance with high strength and good impact toughness.

17-4PH grade combines the following characteristics:

• Good corrosion resistance (just below that of 304)
• High hardness and strength
• Controlled balance of mechanical properties by ageing (precipitation hardening)
• Improved toughness compared to 431 including use at sub-zero temperatures for the softer conditions
• Magnetic
• Thermal expansion comparable to carbon steel
• Easier to weld than martensitic grades like 420 and 431

17-4 PH develops its high strength from the precipitation of copper particles in its martensitic matrix.

It comes in various conditions denoted by H plus ageing temperature in °F, for example H900, H1025 etc.

The higher the ageing temperature, the lower is the strength and the higher are the ductility and toughness.

The minimum 0.2% PS varies from 520 MPa to 1170 MPa depending on the condition.

The combination of high strength and good corrosion resistance finds uses in:

Drive shafts, bearings, gears, hydraulic rams, valve stems, load cells, bridge bearings, tensioning systems,

golf clubs, quick release pins, fasteners, aerospace, medical devices, food processing, conveying equipment,

fall arrest systems.

17-4 PH is the natural choice of high strength, corrosion resistant steel particularly where standard martensitic

grades like 431 stainless aren’t quite good enough.

Product range

SUS630, 17-4PH stainless steel sheet, plate, strip and coil, round, flat bar

For Details, please Contact

WUXI GUANGLU Special Steel Co., Ltd.

Stainless martensitic • precipitation hardening steel • stainless ferritic — Our answer to your needs

Tel: +86 510 81812873

Email: export@guanglusteel.com

Wuxi Guanglu special steel ( ISO 9001 certified company ) is a reliable supplier

of high performance stainless materials and specialty alloys.

With the passion for stainless alloys, we are inspired, keeping moving forward.

For over ten years, we have successfully served customers involved in the manufacturing of

cutlery, knives, scissors, medical instruments, aerospace, energy and power generation, 

chemical and oil, shipping, automotive, mold, electronics and mechanical engineering industrial sectors.

We are tailored to meet the needs of customers.
Welcome to inquire, We are happy to work with you.