ASTM A268 UNS S44660 Stainless Steel Seamless Tubes And Pipes
The ferritic structure of UNS S44660 stainless steel provides a
high strength/low work hardening material
with good ductility. These properties allow high design stress
limits with good fabrication characteristics.
Because of the nickel addition, stainless S44660 ( 26-3-3 ) has a
lower ductile-to-brittle transition temperature than
similar ferritic steels without nickel additions.
S44660 stainless is specially engineered to reduce life-cycle cost
by preventing tube leaks, ensuring tube cleanliness,
eliminating chemical treatment and reducing CO2 costs.
Specifications
ASTM A-803, ASME SA-803, ASTM A-268
| Grade | C | Si | Mn | P | S | Cr | Ni | Mo | N | Ti |
| S44660 | 0.030 max | 1.00 max | 1.00 max | 0.040 max | 0.030 max | 25.00~28.00 | 1.00~3.50 | 3.0~4.0 | 0.04 max | (Ti+Cb)=0.20~1.00 and 6X(C+N) min. |
Characteristics
- Significantly higher modulus that allows the use of a lighter wall
with less problem of vibration
- Higher steam and water droplet erosion resistance allowing a
greater cushion in cases where upset conditions may occur
- Weldability to other stainless steels
- Higher strength and modulus which allows more tolerance for those
tough designs and installations
- Superior Corrosion Resistance
Typical applications
used in power plant condensers, heat exchangers and desalination
plants due to its excellent corrosion resistance,
good thermal conductivity, and superior mechanical and physical
properties.
For Details, please Contact
WUXI GUANGLU Special Steel Co., Ltd.
Stainless martensitic • precipitation hardening steel • stainless
ferritic — Our answer to your needs
Tel: +86 510 81812873
Email: export@guanglusteel.com
